Cilia and Nodal Flow in Asymmetry: An Engineering Perspective.

Over the past several years, cilia in the primitive node have become recognized more and more for their contribution to development, and more specifically, for their role in axis determination. Although many of the mechanisms behind their influence remain undocumented, it is known that their presence and motion in the primitive node of developing embryos is the determinant of the left-right axis. Studies on cilial mechanics and nodal fluid dynamics have provided clues as to how this asymmetry mechanism works, and more importantly, have shown that direct manipulation of the flow field in the node can directly influence physiology. Although relatively uncommon, cilial disorders have been shown to have a variety of impacts on individuals from chronic respiratory infections to infertility, as well as situs inversus which is linked to congenital heart disease. After first providing background information pertinent to understanding nodal flow and information on why this discussion is important, this paper aims to give a review of the history of nodal cilia investigations, an overview of cilia mechanics and nodal flow dynamics, as well as a review of research studies current and past that sought to understand the mechanisms behind nodal cilia's involvement in symmetry-breaking pathways through a biomedical engineering perspective. This discussion has the additional intention to compile interdisciplinary knowledge on asymmetry and development such that it may encourage more collaborative efforts between the sciences on this topic, as well as provide insight on potential paths forward in the field.

Conjugate Multimode Heat Transfer Analysis of Cryogenic EXLO Manipulation.

In this study, a conjugate radiation/conduction multimode heat transfer analysis of cryogenic focused ion beam (FIB) milling steps necessary for producing ex situ lift out specimens under cryogenic conditions (cryo-EXLO) is performed. Using finite volume for transient heat conduction and enclosure theory for radiation heat transfer, the analysis shows that as long as the specimen is attached or touching the FIB side wall trenches, the specimen will remain vitreous indefinitely, while actively cooled at liquid nitrogen (LN2) temperatures. To simulate the time needed to perform a transfer step to move the bulk sample containing the FIB-thinned specimen from the cryo-FIB to the cryo-EXLO cryostat, the LN2 temperature active cooling is turned off after steady-state conditions are reached and the specimen is monitored over time until the critical devitrification temperature is reached. Under these conditions, the sample will remain vitreous for >3 min, which is more than enough time needed to perform the cryo-transfer step from the FIB to the cryostat, which takes only ∼10 s. Cryo-transmission electron microscopy images of a manipulated cryo-EXLO yeast specimen prepared with cryo-FIB corroborates the heat transfer analysis.

Patient-Specific Multi-Scale Model Analysis of Hemodynamics Following the Hybrid Norwood Procedure for Hypoplastic Left Heart Syndrome: Effects of Reverse Blalock-Taussig Shunt Diameter.

INTRODUCTION: The hybrid Norwood (HN) is a relatively new first stage palliative procedure for neonates with hypoplastic left heart syndrome, in which a sustainable uni-ventricular circulation is established in a less invasive manner than with the standard Norwood procedure. A computational multiscale model of the circulation following the HN procedure was used to obtain detailed hemodynamics. Implementation of a reverse-BT shunt (RBTS), a synthetic bypass from the main pulmonary to the innominate artery placed to counteract aortic arch stenosis, and its effects on local and global hemodynamics were studied. METHODS: A post-op patient-derived anatomy of the HN procedure was utilized with varying degrees of distal arch obstruction, or stenosis, (nominal and 90% lumenal area reduction) and varying RBTS diameters (3.0, 3.5, 4.0 mm). A closed lumped parameter model (LPM) for the proximal and peripheral circulations was coupled to a 3D computational fluid dynamics (CFD) model in order to obtain converged flow fields for analysis. RESULTS: CFD analyses of patient-derived anatomic configurations demonstrated consistent trends of vascular bed perfusion, vorticity, oscillatory shear index and wall shear stress levels. In the models with severe stenosis, implementation of the RBTS resulted in a restoration of arterial perfusion to near-nominal levels regardless of the shunt diameter. Shunt flow velocity, vorticity, and overall wall shear stress levels decreased with increasing shunt diameter, while shunt flow and systemic oxygen delivery increased with increased shunt diameter. In the absence of distal arch stenosis, large (4.0 mm) grafts may risk thrombosis due to low velocities and flow patterns. CONCLUSION: Among the three graft sizes, the best option seems to be the 3.5 mm RBTS which provides a more organized flow similar to that of the 3.0 mm configuration with lower levels of wall shear stress. As such, in the setting of this study and for comparable HN physiologies our results suggest that: (1) the 4.0 mm shunt is a generous shunt diameter choice that may be problematic particularly when implemented prophylactically in the absence of stenosis, and (2) the 3.5 mm shunt may be a more suitable alternative since it exhibits more favorable hemodynamics at lower levels of wall shear stress.

Computational Investigation of a Self-Powered Fontan Circulation.

Children born with anatomic or functional "single ventricle" must progress through two or more major operations to sustain life. This management sequence culminates in the total cavopulmonary connection, or "Fontan" operation. A consequence of the "Fontan circulation", however, is elevated central venous pressure and inadequate ventricular preload, which contribute to continued morbidity. We propose a solution to these problems by increasing pulmonary blood flow using an "injection jet" (IJS) in which the source of blood flow and energy is the ventricle itself. The IJS has the unique property of lowering venous pressure while enhancing pulmonary blood flow and ventricular preload. We report preliminary results of an analysis of this circulation using a tightly-coupled, multi-scale computational fluid dynamics model. Our calculations show that, constraining the excess volume load to the ventricle at 50% (pulmonary to systemic flow ratio of 1.5), an optimally configured IJS can lower venous pressure by 3 mmHg while increasing systemic oxygen delivery. Even this small decrease in venous pressure may have substantial clinical impact on the Fontan patient. These findings support the potential for a straightforward surgical modification to decrease venous pressure, and perhaps improve clinical outcome in selected patients.

Experimental Study of Anisotropic Stress/Strain Relationships of Aortic and Pulmonary Artery Homografts and Synthetic Vascular Grafts.

Homografts and synthetic grafts are used in surgery for congenital heart disease (CHD). Determining these materials' mechanical properties will aid in understanding tissue behavior when subjected to abnormal CHD hemodynamics. Homograft tissue samples from anterior/posterior aspects, of ascending/descending aorta (AA, DA), innominate artery (IA), left subclavian artery (LScA), left common carotid artery (LCCA), main/left/right pulmonary artery (MPA, LPA, RPA), and synthetic vascular grafts, were obtained in three orientations: circumferential, diagonal (45 deg relative to circumferential direction), and longitudinal. Samples were subjected to uniaxial tensile testing (UTT). True strain-Cauchy stress curves were individually fitted for each orientation to calibrate Fung model. Then, they were used to calibrate anisotropic Holzapfel-Gasser model (R2 > 0.95). Most samples demonstrated a nonlinear hyperelastic strain-stress response to UTT. Stiffness (measured by tangent modulus at different strains) in all orientations were compared and shown as contour plots. For each vessel segment at all strain levels, stiffness was not significantly different among aspects and orientations. For synthetic grafts, stiffness was significantly different among orientations (p < 0.042). Aorta is significantly stiffer than pulmonary artery at 10% strain, comparing all orientations, aspects, and regions (p = 0.0001). Synthetic grafts are significantly stiffer than aortic and pulmonary homografts at all strain levels (p < 0.046). Aortic, pulmonary artery, and synthetic grafts exhibit hyperelastic biomechanical behavior with anisotropic effect. Differences in mechanical properties among vascular grafts may affect native tissue behavior and ventricular/arterial mechanical coupling, and increase the risk of deformation due to abnormal CHD hemodynamics.

Developmental dysplasia of the hip: A computational biomechanical model of the path of least energy for closed reduction.

This study utilized a computational biomechanical model and applied the least energy path principle to investigate two pathways for closed reduction of high grade infantile hip dislocation. The principle of least energy when applied to moving the femoral head from an initial to a final position considers all possible paths that connect them and identifies the path of least resistance. Clinical reports of severe hip dysplasia have concluded that reduction of the femoral head into the acetabulum may occur by a direct pathway over the posterior rim of the acetabulum when using the Pavlik harness, or by an indirect pathway with reduction through the acetabular notch when using the modified Hoffman-Daimler method. This computational study also compared the energy requirements for both pathways. The anatomical and muscular aspects of the model were derived using a combination of MRI and OpenSim data. Results of this study indicate that the path of least energy closely approximates the indirect pathway of the modified Hoffman-Daimler method. The direct pathway over the posterior rim of the acetabulum required more energy for reduction. This biomechanical analysis confirms the clinical observations of the two pathways for closed reduction of severe hip dysplasia. The path of least energy closely approximated the modified Hoffman-Daimler method. Further study of the modified Hoffman-Daimler method for reduction of severe hip dysplasia may be warranted based on this computational biomechanical analysis. © 2016 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 35:1799-1805, 2017.

Computational analysis of pediatric ventricular assist device implantation to decrease cerebral particulate embolization.

Stroke is the most devastating complication after ventricular assist device (VAD) implantation with a 19% incidence and 65% mortality in the pediatric population. Current pediatric VAD technology and anticoagulation strategies alone are suboptimal. VAD implantation assisted by computational methods (CFD) may contribute reducing the risk of cerebral embolization. Representative three-dimensional aortic arch models of an infant and a child were generated. An 8 mm VAD outflow-graft (VAD-OG) anastomosed to the aorta was rendered and CFD was applied to study blood flow patterns. Particle tracks, originating in the VAD, were computed with a Lagrangian phase model and the percentage of particles entering the cerebral vessels was calculated. Eight implantation configurations (infant = 5 and child = 3) and 5 particle sizes (0.5, 1, 2, 3, and 4 mm) were considered. For the infant model, percentage of particles entering the cerebral vessels ranged from 15% for a VAD-OG anastomosed at 90° to the aorta, to 31% for 30° VAD-OG anastomosis (overall percentages: X(2) = 10,852, p < 0.0001). For the child model, cerebral embolization ranged from 9% for the 30° VAD-OG anastomosis to 15% for the 60° anastomosis (overall percentages: χ(2) = 10,323, p < 0.0001). Using detailed CFD calculations, we demonstrate that the risk of stroke depends significantly on the VAD implantation geometry. In turn, the risk probably depends on patient-specific anatomy. CFD can be used to optimize VAD implantation geometry to minimize stroke risk.

Comparison Between Bench-Top and Computational Modelling of Cerebral Thromboembolism in Ventricular Assist Device Circulation.

Despite improvements in ventricular assist devices (VAD) design, VAD-induced stroke rates remain remarkably high at 14-47%. We previously employed computational fluid dynamics (CFD) to propose adjustment of VAD outflow graft (VAD-OG) implantation to reduce stoke. Herein, we present an in-vitro model of cerebral vessel embolization in VAD-assisted circulation, and compare benchtop results to CFD predictions. The benchtop flow-loop consists of a 3D printed aortic bed using Accura 60 polymer driven by a continuous-flow pump. Three hundred spherical particles simulating thrombi of 2, 3.5, and 5 mm diameters were injected at the mock VAD-OG inlet. A water and glycerin mixture (3.8 cP viscosity) synthetically mimicked blood. The flowrate was adjusted to match the CFD Reynolds number. Catch cans were used to capture and count particles reaching cerebral vessels. VAD-OG geometries were evaluated using comparison of means Z-score range of -1.96 ≤ Z ≤ 1.96 to demonstrate overall agreement between computational and in-vitro techniques. Z-scores were: (i) Z = -1.05 for perpendicular (0°), (ii) Z = 0.32 for intermediate (30°), and (iii) Z = -0.52 for shallow (60°) anastomosis and confirmed agreement for all geometries. This study confirmed added benefits of using a left carotid artery bypass-graft with percent embolization reduction: 22.6% for perpendicular, 21.2% for intermediate, and 11.9% for shallow anastomoses. The shallow anastomosis demonstrated lower degrees of aortic arch flow recirculation, consistent with steady-flow computations. Quantitatively and qualitatively, contemporary steady-flow computational models for predicting VAD-induced cerebral embolization can be achieved in-vitro to validate the CFD equivalent.

A patient-specific model of the biomechanics of hip reduction for neonatal Developmental Dysplasia of the Hip: Investigation of strategies for low to severe grades of Developmental Dysplasia of the Hip.

A physics-based computational model of neonatal Developmental Dysplasia of the Hip (DDH) following treatment with the Pavlik Harness (PV) was developed to obtain muscle force contribution in order to elucidate biomechanical factors influencing the reduction of dislocated hips. Clinical observation suggests that reduction occurs in deep sleep involving passive muscle action. Consequently, a set of five (5) adductor muscles were identified as mediators of reduction using the PV. A Fung/Hill-type model was used to characterize muscle response. Four grades (1-4) of dislocation were considered, with one (1) being a low subluxation and four (4) a severe dislocation. A three-dimensional model of the pelvis-femur lower limb of a representative 10 week-old female was generated based on CT-scans with the aid of anthropomorphic scaling of anatomical landmarks. The model was calibrated to achieve equilibrium at 90° flexion and 80° abduction. The hip was computationally dislocated according to the grade under investigation, the femur was restrained to move in an envelope consistent with PV restraints, and the dynamic response under passive muscle action and the effect of gravity was resolved. Model results with an anteversion angle of 50° show successful reduction Grades 1-3, while Grade 4 failed to reduce with the PV. These results are consistent with a previous study based on a simplified anatomically-consistent synthetic model and clinical reports of very low success of the PV for Grade 4. However our model indicated that it is possible to achieve reduction of Grade 4 dislocation by hyperflexion and the resultant external rotation.

Experimental study of anisotropic stress/strain relationships of the piglet great vessels and relevance to pediatric congenital heart disease.

BACKGROUND: Determining material mechanical properties of neonatal aorta and pulmonary artery will aid understanding tissue behavior when subjected to abnormal hemodynamics of congenital heart disease. METHODS: Aorta and pulmonary arteries were harvested from 6 neonatal piglets (mean weight 3.5 kg). Tissue samples from ventral and dorsal aspects of ascending aorta (AA) and descending aorta (DA), innominate artery (IA), left subclavian artery (LScA), main pulmonary artery (MPA), and left pulmonary artery (LPA) and right pulmonary artery (RPA) were obtained in three orientations: circumferential, diagonal, and longitudinal. Samples were subjected to uniaxial tensile testing. True strain-Cauchy stress curves were individually fitted for each orientation to calibrate the Fung model, and to measure tissue stiffness (10% strain). RESULTS: All samples, for all orientations, demonstrated nonlinear hyperelastic strain-stress response to uniaxial tensile testing (Holzapfel-Gasser and fitted-Fung models R(2) > 0.95). For each vessel segment, stiffness was not significantly different among orientations. Stiffness values in all orientations, including ventral/dorsal samples, were compared between AA > MPA (p = 0.08), DA > MPA (p < 0.01), and DA > AA (p = 0.35). Comparison of circumferential orientation samples showed AA and DA are significantly stiffer than MPA (p < 0.05), and MPA stiffness was similar to that of the RPA but slightly greater than LPA. Also, dorsal circumferential samples of all segments were slightly stiffer than ventral (p = 0.21). Dorsal aspect of AA was slightly stiffer in all orientations (p = 0.248). CONCLUSIONS: The neonatal aorta and pulmonary artery exhibit hyperelastic biomechanical behavior with an anisotropic effect. Differences between aorta and pulmonary artery may play a role in native tissue behavior, ventricular and arterial mechanical coupling, and risk of deformation due to abnormal hemodynamics of congenital heard disease.

External counterpulsation of a systemic-to-pulmonary artery shunt increases coronary blood flow in neonatal piglets.

BACKGROUND: Systemic-to-pulmonary artery shunt (SPS) palliation reduces coronary blood flow (CBF), which may precipitate myocardial ischemia postoperatively. HYPOTHESIS: Counterpulsation (CP) of SPS augments CBF. METHODS: Seven neonatal piglets (4.3 ± 0.23 kg) underwent sternotomy and ductus ligation. With a 5-mm polytetrafluoroethylene graft, SPS was created from innominate to pulmonary artery. A rigid shell holding a 9.5-mm diameter balloon was placed around the graft for CP. Using electrocardiographic signal, CP was initiated to trigger balloon inflation/deflation during the diastolic/systolic intervals, respectively. Instantaneous proximal and distal pulmonary artery and mid-anterior descending coronary artery flow rates were measured using transit time flow probes. Blood pressure and flow rates were recorded during three states: shunt closed, shunt open, and shunt open with CP. STATISTICAL COMPARISON: Friedman's test and repeated measures analysis of variance. RESULTS: Diastolic pressure decreased significantly with the shunt open (39 ± 8.4 to 28 ± 4.5 mm Hg, P = .05), then increased with CP (33 ± 2.3 mm Hg, P = .03). Median ratio of pulmonary to systemic flow (Qp/Qs) was 1.19, 1.9, and 1.53 with shunt closed, open, and open with CP, respectively. With CP, both diastolic coronary flow per minute (P = .018) and average diastolic flow rate per diastolic interval (P = .03) increased as well as total coronary flow per minute (P = .066; 19.6% ± 11.7%, 25.2% ± 17.0%, and 15.4% ± 13.9% change from shunt open, respectively). The percentage increase in average diastolic flow rate per diastolic interval correlated strongly with Qp/Qs (R (2) = .838). CONCLUSIONS: In this model of SPS, CP increased diastolic blood pressure and CBF while maintaining significant augmentation of pulmonary blood flow (Qp/Qs). Shunt CP may aid in early postoperative management of palliative congenital heart disease.

Mathematical modeling of patient-specific ventricular assist device implantation to reduce particulate embolization rate to cerebral vessels.

Stroke is the most devastating complication after ventricular assist device (VAD) implantation, with an incidence of 14%-47% despite improvements in device design and anticoagulation. This complication continues to limit the widespread implementation of VAD therapy. Patient-specific computational fluid dynamics (CFD) analysis may elucidate ways to reduce this risk. A patient-specific three-dimensional model of the aortic arch was generated from computed tomography. A 12 mm VAD outflow-graft (VAD-OG) "anastomosed" to the aorta was rendered. CFD was applied to study blood flow patterns. Particle tracks, originating from the VAD, were computed with a Lagrangian phase model and percentage of particles entering the cerebral vessels was calculated. Twelve implantation configurations of the VAD-OG and three particle sizes (2, 4, and 5 mm) were considered. Percentage of particles entering the cerebral vessels ranged from 6% for the descending aorta VAD-OG anastomosis, to 14% for the ascending aorta at 90 deg VAD-OG anastomosis. Values were significantly different among all configurations (X(2) = 3925, p < 0.0001). Shallower and more cephalad anastomoses prevented formation of zones of recirculation in the ascending aorta. In this computational model and within the range of anatomic parameters considered, the percentage of particles entering the cerebral vessels from a VAD-OG is reduced by nearly 60% by optimizing outflow-graft configuration. Ascending aorta recirculation zones, which may be thrombogenic, can also be eliminated. CFD methods coupled with patient-specific anatomy may aid in identifying the optimal location and angle for VAD-OG anastomosis to minimize stroke risk.

Mechanics of hip dysplasia reductions in infants using the Pavlik harness: a physics-based computational model.

Biomechanical factors influencing the reduction of dislocated hips with the Pavlik harness in patients of Developmental Dysplasia of the Hip (DDH) were studied using a three-dimensional computer model simulating hip reduction dynamics in (1) subluxated and (2) fully dislocated hip joints. Five hip adductor muscles were identified as key mediators of DDH prognosis, and the non-dimensional force contribution of each in the direction necessary to achieve concentric hip reductions was determined. Results point to the adductor muscles as mediators of subluxated hip reductions, as their mechanical action is a function of the degree of hip dislocation. For subluxated hips in abduction and flexion, the Pectineus, Adductor Brevis, Adductor Longus, and proximal Adductor Magnus contribute positively to reduction, while the rest of the Adductor Magnus contributes negatively. In full dislocations all muscles contribute detrimentally to reduction, elucidating the need for traction to reduce Graf IV type dislocations. Reduction of dysplastic hips was found to occur in two distinct phases: (a) release phase and (b) reduction phase.

Computational fluid dynamics analysis of surgical adjustment of left ventricular assist device implantation to minimise stroke risk.

BACKGROUND: Currently, mechanical support is the most promising alternative to cardiac transplantation. Ventricular assist devices (VADs) were originally used to provide mechanical circulatory support in patients awaiting planned heart transplantation ('bridge-to-transplantation' therapy). The success of short-term bridge devices led to clinical trials evaluating the clinical suitability of long-term support ('destination' therapy) with left ventricular assist devices (LVADs). The first larger scale, randomised trial that tested long-term support with an LVAD reported a 44% reduction in the risk of stroke or death in patients with an LVAD. In spite of the success of LVADs as bridge-to-transplantation and long-term support, patients managed by these devices are still at risk of several adverse events. The most devastating complication is caused by embolisation of thrombi formed within the LVAD or inside the heart into the brain. Prevention of thrombi formation is attempted through anticoagulation management and by improving LVADs design; however, there is still significant occurrence of thromboembolic events in patients. Investigators have reported that the incidence of thromboembolic cerebral events ranges from 14% to 47% over a period of 6-12 months. METHODS AND APPROACH: An alternative method to reduce the incidence of cerebral embolisation is proposed by the co-authors, and the hypothesis is that it is possible to minimise the number of thrombi flowing into the carotid and vertebral arteries by an optimal placement of the LVAD outflow conduit, with or without the addition of aortic bypass connecting the ascending aorta and the innominate artery (IA), or left carotid artery. This paper presents the computational fluid dynamics (CFD) analysis of the aortic arch haemodynamics using a representative geometry of the human aortic arch with or without an alternative aortic bypass. In order to study the trajectory of the thrombi within the aortic arch bed, the CFD code, Fluent 6.3, is utilised to resolve the flow field and to solve the Lagrangian particle tracking of thrombi released randomly at the inlet of the LVAD cannula. RESULTS: Results are presented for simulations of thrombi in the range of 2-5 mm. The percentage of individual diameter as well as aggregate diameter thrombi flowing to the carotid and vertebral arteries as a function of LVAD conduit placement and aortic bypass implantation is reported. The influence of the LVAD conduit implantation and bypass reveals a nearly 50% variation in predicted cerebral embolism rates. CONCLUSIONS: The adjustment of the location of the anastomosis of the LVAD outflow cannula as well as its angle of incidence plays a significant role in the level of thromboembolisms. By proper adjustment in this CFD study of a synthetic model of an aortic arch bed, we found that nearly a 50% reduction in cerebral embolism could be achieved for a configuration consisting of a shallow angle of implantation over a baseline normal incidence of the LVAD cannula. Within the limitations of our model, we have established that the LVAD implantation geometry is an important factor and should be taken into consideration when implanting an LVAD. It is possible that other parameters such as distance of the LVAD outflow cannula to the root of the IA could affect the thrombi embolisation probabilities. However, the results of this study suggest that the risk of stroke may be significantly reduced by as much as 50% by tailoring the VAD implantation by a simple surgical manoeuvre. The results of this line of research may ultimately lead to techniques that can be used to estimate the optimal LVAD configuration in a patient-specific manner by pre-operative imaging.

Computational analysis of hybrid Norwood circulation with distal aortic arch obstruction and reverse Blalock-Taussig shunt.

BACKGROUND: The hemodynamics characteristics of the hybrid Norwood (HN) procedure differ from those of the conventional Norwood and are not fully understood. We present a multiscale model of HN circulation to understand local hemodynamics and effects of aortic arch stenosis and a reverse Blalock-Taussig shunt (RBTS) on coronary and carotid perfusion. METHODS: Four 3-dimensional models of four HN anatomic variants were developed, with and without 90% distal preductal arch stenosis and with and without a 4-mm RBTS. A lumped parameter model of the circulation was coupled to a local 3-dimensional computational fluid dynamics model. Outputs from the lumped parameter model provided waveform boundary conditions for the computational fluid dynamics model. RESULTS: A 90% distal arch stenosis reduced pressure and net flow-rate through the coronary and carotid arteries by 30%. Addition of the RBTS completely restored pressure and flow rate to baseline in these vessels. Zones of flow stagnation, flow reversal, and recirculation in the presence of stenosis were rendered more orderly by addition of the RBTS. In the absence of stenosis, presence of the shunt resulted in extensive zones of disturbed flow within the RBTS and arch. CONCLUSIONS: We found that a 4-mm × 21-mm RBTS completely compensated for the effects of a 90% discrete stenosis of the distal aortic arch in the HN. Placed preventatively, the RBTS and arch displayed zones with thrombogenic potential showing recirculation and stagnation that persist for a substantial fraction of the cardiac cycle, indicating that anticoagulation should be considered with a prophylactic RBTS.

Computational fluid dynamics in congenital heart disease.

Computational fluid dynamics has been applied to the design, refinement, and assessment of surgical procedures and medical devices. This tool calculates flow patterns and pressure changes within a virtual model of the cardiovascular system. In the field of paediatric cardiac surgery, computational fluid dynamics is being used to elucidate the optimal approach to staged reconstruction of specific defects and study the haemodynamics of the resulting anatomical configurations after reconstructive or palliative surgery. In this paper, we review the techniques and principal findings of computational fluid dynamics studies as applied to a few representative forms of congenital heart disease.

Disaster management and human health risk II: reducing risk, improving outcomes

"The second International Conference on Disaster Management was reconvened in 2011 in Orlando, Florida"--Pref.(AU)